Relative, Absolute and differential Pressure Transmitters

With forty years of experience and over 135 employees, LABOM is the market leader in the design and manufacture of high quality instruments for the measurement of temperature and pressure. In the field of electric pressure measurement, LABOM has developed models from low cost industrial designs to pressure transmitters of very high quality with a precision of measurement superior than 0.1% of full scale that complies with the most demanding standards including the following industries: CHEMICAL / PETROCHEMICAL / ALIMENTATION / PHARMACEUTICAL / PAPER / WATER TREATMENT / WASTE WATERS / ENERGY ENGINEERING / NAVAL / PAINTS, etc… Within their large manufacturing range, we emphasize the following models:

PASCAL Ci intelligent pressure transmitter for measuring pressure, differential pressure, flow and level.

PASCAL Ci intelligent pressure transmitter for measuring pressure, differential pressure, flow and level. The PASCAL Ci is an intelligent pressure transmitter controlled by a microprocessor. Inside of high quality stainless steel housing is incorporated a sensor of the latest technology as well as a display for the monitoring of the following functions:

• Microprocessor-controlled 2-wire pressure transmitter for the measurement of pressure, differential pressure and level.
• Microprocessor-controlled 2-wire pressure transmitter for the measurement of pressure, differential pressure and level.
• Text-oriented operating control via graphic display.IIC T6.
• Simple configuration helped by the texted display
• Measurement ranges from 16 mbar up to 400 bar.
• Very high resistance to high peaks of pressure.
• Turndown 20:1
• Output signal: 4 – 20 mA, in 2-wire circuits.
• Simultaneous communication via HART protocol.HART
• 0.1% precision of the full scale.

PASCAL CV -a new pressure transmitter that uses the ?smart? modular technology.

El término “tecnología modular smart” muestra un nuevo concepto de producto.

The term ?smart modular technology? demonstrates a new concept of product. The modular design of the pressure transmitter, permits the user to choose the instrument most adequate for your particular application. Also with a large number of different connections for the process, the PASCAL CV incorporates the technology for the modular and intelligent display, switching and communication. These functional modules can be changed or amplified easily and without the necessity to dismount the instrument during process. The automatic detection modules allow superfluous programming.

• Modular pressure transmitter (2-wire, 4 ? 20 mA)mA )
• Functional modules:
• Multi-function display
• Switching module with 2 channels free of potential.
• Function module replacement on site without recalibration “plug and measure”
• Continuous monitoring of the electronics and the measurement cell.
• Measurement ranges from 0…. 8 mbar up to 0….100 bar.
• Accuracy: < 0.25% (linearity, hysteresis and repeatability)
• Turndown 5:1.
• The housing and components in contact with the fluid manufactured in stainless steel.
• Hygienic design according to EHEDG, FDA and GMP.
• Standard process connections with other connections available at request.
• Protection types: EX, II 1/2 G EEx ia II C T6, II2DT60ºC, IP65.

COMPACT Pressure transmitter.
The COMPACT pressure transmitter accurately converts pressure measurements into a load-independent current signal (4-20 mA for example). This instrument can be used in virtually all applications of industrial processes in combination with its different housing designs in stainless steel as well as a large range of process connections.

• The housing and components in contact with the fluid manufactured in stainless steel.
• Piezoresistive measuring system, vacuum-tight and protected against over pressures.
• Measurement ranges from 0….160 mbar up to 0….400 bar.
• Internally adjustable potentiometer.
• Error de linealidad, incluyendo la histéresis < 0,2% fondo de escala
• Linearity error including hysteresis < 0.2 %
• Explosion protection: EX II 2G EEx ib IIC T6 and conforms to ATEX.
• Electric connections:
  • Right-angle plug.
  • Cable connection.
  • Locking plug.

Industrial design pressure transmitters

• Standard low cost pressure transmitter.
• Housing in stainless steel as standard with protection grade IP 65
• Measuring system for ceramic cells.
• Measurement ranges from 0…250 mbar up to 0…600 bar.
• > 0.2% deviation of the characteristic line in full scale.